Post by Alicia on Mar 31, 2012 17:18:56 GMT -6
1. INTERIORS: ALL BURNABLE MATERIAL MUST BE REMOVED. all glass,tail lights and chrome from outside of car must be removed. do this before you get to the track.
2. BATTERIES: MUST BE RELOCATED INSIDE AND MOUNTED IN A FULLY ENCLOSED BATTERY BOX. mount this box securely to the floor. limit 2
3. GAS TANKS AND FUEL: all classes must relocated marine type gas tank inside. all classes must use approved lines all lines must be shielded from driver. gas tanks must be
mounted to floor using steel straps or bolts, no
bungies.electric pumps must have shut-off switch mounted in a easy to reach location.
4.TRANSMISSION COOLERS: allowed in all classes, coolers should be mounted solid and covered . they should have either metal or transmission lines.
5.TIRES: any thread, must be 4-6 ply max all classes, rear-end may be locked.
6.MOTOR, TRANS AND EXHauST: all classes can run any motor trans combo, compacts must run either 3 4 or 6 cylinder only. exhaust must exit out top of hood or under car.
7.BUMPERS: all classes may weld front and rear bumpers on at connecting seems only. mini cars can run full size bumpers on front only, must cut off ends same width as car.
8. DRIVERS DOOR: all classes may weld drivers door 100% in any variation. you may install a skid rail on outside of door keep this flush with the door, window nets are allowed
9. PASSENGER DOORS: all classes may weld passenger doors 6 on 6 off. dont weld inside of passenger doors.
10.HOODS AND TRUNKS: all classes may be bolted or chained in 6 spots, four of which can go through frame. 1 1/2 inch bolts maximum.
11. DASH DOOR BARS: all classes may run both a door and dash bar. you may connect dash bar to door bar on passenger- side 2 inches from inside door skin.
12.FRAMES: you may bolt frame to body in three places on each side, frames fixed with frame thickness plate only where bent and only two of four sides. no foreign objects inside frames, do not plug factory holes.... no hitches.
radiators allowed..radiator barrels allowed..water barrels allowed inside as long as its safe....
Classes for 2012
compacts 0-106''
midsize 107"-116"
fullsize 117" and up
based on car count
1st $1000 2nd $500 3rd $200 and trophy
any questions call Todd Schuety @ 218-764-2644
2. BATTERIES: MUST BE RELOCATED INSIDE AND MOUNTED IN A FULLY ENCLOSED BATTERY BOX. mount this box securely to the floor. limit 2
3. GAS TANKS AND FUEL: all classes must relocated marine type gas tank inside. all classes must use approved lines all lines must be shielded from driver. gas tanks must be
mounted to floor using steel straps or bolts, no
bungies.electric pumps must have shut-off switch mounted in a easy to reach location.
4.TRANSMISSION COOLERS: allowed in all classes, coolers should be mounted solid and covered . they should have either metal or transmission lines.
5.TIRES: any thread, must be 4-6 ply max all classes, rear-end may be locked.
6.MOTOR, TRANS AND EXHauST: all classes can run any motor trans combo, compacts must run either 3 4 or 6 cylinder only. exhaust must exit out top of hood or under car.
7.BUMPERS: all classes may weld front and rear bumpers on at connecting seems only. mini cars can run full size bumpers on front only, must cut off ends same width as car.
8. DRIVERS DOOR: all classes may weld drivers door 100% in any variation. you may install a skid rail on outside of door keep this flush with the door, window nets are allowed
9. PASSENGER DOORS: all classes may weld passenger doors 6 on 6 off. dont weld inside of passenger doors.
10.HOODS AND TRUNKS: all classes may be bolted or chained in 6 spots, four of which can go through frame. 1 1/2 inch bolts maximum.
11. DASH DOOR BARS: all classes may run both a door and dash bar. you may connect dash bar to door bar on passenger- side 2 inches from inside door skin.
12.FRAMES: you may bolt frame to body in three places on each side, frames fixed with frame thickness plate only where bent and only two of four sides. no foreign objects inside frames, do not plug factory holes.... no hitches.
radiators allowed..radiator barrels allowed..water barrels allowed inside as long as its safe....
Classes for 2012
compacts 0-106''
midsize 107"-116"
fullsize 117" and up
based on car count
1st $1000 2nd $500 3rd $200 and trophy
any questions call Todd Schuety @ 218-764-2644